Fujitsu PRIMERGY RX2520 M1 - Handling Processor Heat Sinks; Preliminary Steps; Installing Processor Heat Sinks

RX2520 M1 Upgrade and Maintenance Manual 245
Processors
11.5 Handling processor heat sinks
11.5.1 Preliminary steps
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
11.5.2 Installing processor heat sinks
Figure 134: Standard processor heat sink V26898-B977-V101
Field Replaceable Unit
(FRU)
if thermal paste is involved
Hardware: 15 minutes
Upgrade and Repair Unit
(URU)
Tool: Phillips PH2 / (+) No. 2 screw driver