Fujitsu PRIMERGY RX2520 M1 - Front Panel Cage; Replacing the Front Panel Cage; Preliminary Steps; Removing the Front Panel Cage

RX2520 M1 Upgrade and Maintenance Manual 323
Front panel and external connectors
Ê "Reassembling" on page 59
Ê "Connecting the server to the power source" on page 64
Ê "Switching on the server" on page 66
Ê "Enabling BitLocker functionality" on page 93
13.3 Front panel cage
13.3.1 Replacing the front panel cage
13.3.1.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Locating the defective server" on page 49
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
13.3.1.2 Removing the front panel cage
Ê Disconnect all cables from the modules that are installed in the front panel
cage.
– Front panel cable
– Front VGA cable
– ODD cable
– LSD cable
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver