Fujitsu PRIMERGY RX2520 M1 - Preliminary Steps; Removing the Defective ODD; Installing the New ODD; Concluding Steps

RX2520 M1 Upgrade and Maintenance Manual 271
Accessible drives
12.5.3.1 Preliminary steps
Ê Ask the system administrator to eject all remaining backup or optical media
from the backup or optical disk drive before removing it from the server.
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
12.5.3.2 Removing the defective ODD
Ê "Removing the ODD" on page 268
12.5.3.3 Installing the new ODD
Ê "Preparing an ODD" on page 264
Ê "Installing an ODD" on page 266
12.5.3.4 Concluding steps
Ê "Installing the fan box" on page 171
Ê "Reassembling" on page 59
Ê "Connecting the server to the power source" on page 64
Ê "Enabling BitLocker functionality" on page 93
12.6 Optical disk drive (ODD) for 3.5-inch version
12.6.1 Installing the optical disk drive (ODD)
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes