Fujitsu PRIMERGY RX2520 M1 - Removing the FBU from the Holder; Installing a New FBU; Concluding Steps

RX2520 M1 Upgrade and Maintenance Manual 211
Expansion cards and backup units
9.5.4.4 Removing the FBU from the holder
Figure 106: Removing the FBU from the holder
Ê Pull the FBU at a slight angle out of the holder.
9.5.4.5 Installing a new FBU
Ê "Connecting the FBU cable to the FBU" on page 203
Ê "Preparing the FBU" on page 201
Ê "Installing the FBU holder onto the air duct" on page 203
9.5.4.6 Concluding steps
Ê "Reassembling" on page 59
Ê "Connecting the server to the power source" on page 64