15.3.2.7 Configuration 3 to configuration 6
Figure 265: 4x 2.5-inch version + LTO
Figure 266: 8x 2.5-inch version + LTO
15.3.2.8 Steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê Remove all external cables.
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
Ê "Removing the front cover" on page 376
Ê Remove the multicage, see "Removing the front panel cage" on page 323.
Ê Install a 4x 2.5-inch HDD backplane, see"Installing the 4x 2.5-inch HDD SAS
backplane" on page 144.
Ê Install the HDD cage 4, see "Installing a HDD cage" on page 159.
Ê Install the panelhousing, see "Re-installing the front panel cage" on
page 325.
To Next Page
Loading...
