5.1.5 Note on server maintenance in a Multipath I/O
environment
When booting your server offline from the ServerView Suite DVD to perform an
offline BIOS / firmware update using the ServerView Update DVD or collect
diagnostic data using PrimeCollect in a Multipath I/O environment, there is a risk
of damaging the system configuration which may leave the system unable to
boot.
I This is a known restriction of Windows PE with Multipath drivers.
Using Update Manager Express
Ê If performing an offline BIOS / firmware update, first of all prepare the
ServerView Update DVD or USB stick:
Ê Download the latest ServerView Update DVD image from Fujitsu:
for the EMEA market
ftp://ftp.ts.fujitsu.com/images/serverview
for the Japanese market:
http://jp.fujitsu.com/platform/server/primergy/products/note/svsdvd/dvd/
Ê Burn the image to a DVD.
Ê In order to create a bootable USB stick, please proceed as described in
the "Local System Update for PRIMERGY Servers" user guide.
Ê Before using the ServerView Update DVD or USB stick in an offline
environment, properly shut down the server and disconnect all external I/O
connections (like LAN or FC cables) from the system. Only keep mouse,
keyboard, video cable and AC power cord connected.
I Ensure that all external I/O connections are uniquely identified so that
you can reconnect them into their original locations after concluding
the task.
To start Update Manager Express from the (physical) Update DVD or from a
USB stick, proceed as follows:
Ê Prepare your Update DVD or USB stick as described in the "Local System
Update for PRIMERGY Servers" user guide.
Ê Boot the server from the prepared Update DVD or USB stick:
To Next Page
Loading...
