Figure 272: 16x 2.5-inch HDD version
15.3.2.14 Steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê Remove all external cables.
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
Ê Remove the multicage, see "Removing the front panel cage" on page 323
Ê "Installing the 4x 2.5-inch HDD SAS backplane" on page 144
Ê Install the HDD cage 4, see "Installing a HDD cage" on page 159.
Ê Install the panelhousing, see "Re-installing the front panel cage" on
page 325
Ê Installing the HDD modules or HDD dummy modules, see "Installing a 2.5-
inch HDD / SSD module" on page 129 and "Installing a 2.5-inch dummy
module" on page 132.
Ê "Installing the front cover 2.5-inch version" on page 377
Ê For more information about the cabling see "Configuration 8" on page 408.
Ê "Installing the fan box" on page 171
Ê Remove the ID card from the multicage and insert the ID card into the slot
in the panelhousing.
Ê "Reassembling" on page 59
Ê Connect all external cables.
To Next Page
Loading...
