Fujitsu PRIMERGY RX2520 M1 - Front VGA Connector; Installing the Front VGA Connector; Preliminary Steps; Removing the Front Panel Module

316 Upgrade and Maintenance Manual RX2520 M1
Front panel and external connectors
Ê "Enabling SVOM boot watchdog functionality" on page 87
Ê "Enabling BitLocker functionality" on page 93
13.2 Front VGA connector
13.2.1 Installing the front VGA connector
13.2.1.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Locating the defective server" on page 49
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
13.2.1.2 Removing the front panel module
Ê "Removing the front panel module" on page 313
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: Socket screw driver (5 mm)
Wrench key for UNC #4-40 hexagon bolts