Fujitsu PRIMERGY RX2520 M1 - Removing Expansion Cards; Preliminary Steps; Removing an Expansion Card

186 Upgrade and Maintenance Manual RX2520 M1
Expansion cards and backup units
Ê If applicable, "Enabling Option ROM scan" on page 80.
Ê "Enabling SVOM boot watchdog functionality" on page 87
Ê "Enabling BitLocker functionality" on page 93
9.3.2 Removing expansion cards
9.3.2.1 Preliminary steps
Ê "Locating the defective server" on page 49
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 51
Ê Remove all external cables from the expansion card to be removed.
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
9.3.2.2 Removing an expansion card
Ê If applicable, disconnect internal cables from the expansion card.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver