Fujitsu PRIMERGY RX2520 M1 - Removing the UFM; Preliminary Steps

340 Upgrade and Maintenance Manual RX2520 M1
System board and components
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.
14.3.2 Removing the UFM
14.3.2.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Locating the defective server" on page 49
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Tools: Phillips PH0 / (+) No. 0 screw driver