Fujitsu PRIMERGY RX2520 M1 - Concluding Steps; Removing an LTO Drive in 2.5-Inch Version; Preliminary Steps

RX2520 M1 Upgrade and Maintenance Manual 301
Accessible drives
12.10.6 Concluding steps
Ê "Installing the fan box" on page 171
Ê "Reassembling" on page 59
Ê "Connecting the server to the power source" on page 64
Ê "Switching on the server" on page 66
Ê "Verifying and configuring the backup software solution" on page 81
Ê "Enabling BitLocker functionality" on page 93
12.11 Removing an LTO drive in 2.5-inch version
12.11.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Locating the defective server" on page 49
Ê "Removing backup and optical disk media" on page 71
Ê "Verifying and configuring the backup software solution" on page 71
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver