Fujitsu PRIMERGY RX2520 M1 - Removing the UFM; Concluding Steps; Replacing the UFM

RX2520 M1 Upgrade and Maintenance Manual 341
System board and components
14.3.2.2 Removing the UFM
Figure 232: Removing the UFM (A)
Ê Remove the nylon screw on the defective UFM (1).
Ê Disconnect and remove the defective UFM (2).
Ê The UFM spacer remains on the system board.
14.3.2.3 Concluding steps
Ê "Reassembling" on page 59
Ê "Connecting the server to the power source" on page 64
Ê "Switching on the server" on page 66
Ê "Enabling BitLocker functionality" on page 93
14.3.3 Replacing the UFM
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Software: 5 minutes