Fujitsu PRIMERGY RX2520 M1 - Removing the Defective RDX Drive; Installing the New RDX Drive; Concluding Steps; Installing a LTO Drive in 2.5-Inch Version

294 Upgrade and Maintenance Manual RX2520 M1
Accessible drives
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
12.9.2 Removing the defective RDX drive
Ê "Removing the drive cage" on page 289
Ê "Removing a RDX drive out of the cage" on page 291
12.9.3 Installing the new RDX drive
Ê "Installing a RDX drive in the cage" on page 284
Ê "Installing the RDX drive" on page 286
12.9.4 Concluding steps
Ê "Installing the fan box" on page 171
Ê "Reassembling" on page 59
Ê "Connecting the server to the power source" on page 64
Ê "Switching on the server" on page 66
Ê "Verifying and configuring the backup software solution" on page 81
Ê "Enabling BitLocker functionality" on page 93
12.10 Installing a LTO drive in 2.5-inch version
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver