12.10.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Locating the defective server" on page 49
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
12.10.2 Removing the drive cage
Ê Remove the screws on the rear side of the drive cage see also"Removing
the drive cage" on page 302.
Figure 187: Removing the drive cage
Ê Push the LTO drive out of the bay.
To Next Page
Loading...
