Ê "Enabling BitLocker functionality" on page 93
12.6.3 Replacing an ODD
12.6.3.1 Preliminary steps
Ê Ask the system administrator to eject all remaining backup or optical media
from the backup or optical disk drive before removing it from the server.
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
12.6.3.2 Removing the defective ODD
Ê "Removing the ODD carrier" on page 272
Ê "Removing the ODD carrier" on page 277
12.6.3.3 Installing the new ODD
Ê "Preparing an ODD" on page 264
Ê "Installing an ODD into the ODD carrier" on page 274
12.6.3.4 Concluding steps
Ê "Installing the fan box" on page 171
Ê "Reassembling" on page 59
Ê "Connecting the server to the power source" on page 64
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH0 / (+) No. 0 screw driver
To Next Page
Loading...
