12.5.1.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
12.5.1.2 Removing the ODD dummy module
Figure 152: Removing the ODD dummy module
Ê Pull the locking latch upward to unlock the ODD dummy module.
V CAUTION!
Save the ODD dummy module for future use.
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
To Next Page
Loading...
