14.4.3.4 Concluding steps
Ê "Installing the fan box" on page 171
Ê "Reassembling" on page 59
Ê "Connecting the server to the power source" on page 64
Ê "Switching on the server" on page 66
Ê "Enabling BitLocker functionality" on page 93
14.5 Onboard SAS enabling key
I The onboard SAS enabling key needs to be installed in order to enable
SAS connector SAS 1-4 on the system board.
14.5.1 Installing the onboard SAS enabling key
14.5.1.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Locating the defective server" on page 49
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Tools: tool-less