Fujitsu PRIMERGY RX2520 M1 - Preliminary Steps; Replacing the Onboard SAS Enabling Key; Concluding Steps; Replacing the System Board

362 Upgrade and Maintenance Manual RX2520 M1
System board and components
14.5.3.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Locating the defective server" on page 49.
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
14.5.3.2 Replacing the onboard SAS enabling key
Ê "Removing onboard SAS enabling key" on page 361
Ê "Installing the onboard SAS enabling key" on page 359
14.5.3.3 Concluding steps
Ê "Reassembling" on page 59.
Ê "Connecting the server to the power source" on page 64
Ê "Switching on the server" on page 66
Ê "Enabling BitLocker functionality" on page 93
14.6 Replacing the system board
Field Replaceable Unit
(FRU)
Hardware: 50 minutes
Software: 10 minutes