Fujitsu PRIMERGY RX2520 M1 - Installing a 2.5-Inch Dummy Module

132 Upgrade and Maintenance Manual RX2520 M1
Hard disk drives / solid state drives
Figure 39: Removing a 2.5-inch HDD / SSD module
Ê Pull the HDD / SSD module completely out of its bay.
7.2.3.3 Installing a 2.5-inch dummy module
V CAUTION!
If the removed HDD / SSD module is not replaced immediately, always
replace a dummy module into the unused HDD / SSD bay to comply with
applicable EMC regulations and satisfy cooling requirements.