Fujitsu PRIMERGY RX2520 M1 - Replacing the LTO Drive in 2.5-Inch Version; Preliminary Steps; Removing the Defective LTO Drive; Installing the New LTO Drive

308 Upgrade and Maintenance Manual RX2520 M1
Accessible drives
12.12 Replacing the LTO drive in 2.5-inch version
12.12.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Locating the defective server" on page 49
Ê "Removing backup and optical disk media" on page 71
Ê "Verifying and configuring the backup software solution" on page 71
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Ê "Removing the fan box" on page 168
12.12.2 Removing the defective LTO drive
Ê "Removing the drive cage" on page 302
Ê "Removing a LTO drive out of the cage" on page 303
12.12.3 Installing the new LTO drive
Ê "Installing a LTO drive in the cage" on page 297
Ê "Installing the LTO cage" on page 299
12.12.4 Concluding steps
Ê "Installing the fan box" on page 171
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver