Fujitsu PRIMERGY RX2520 M1 - USB Flash Module (UFM); Installing the UFM; Preliminary Steps

RX2520 M1 Upgrade and Maintenance Manual 337
System board and components
Ê "Switching on the server" on page 66
Ê "Verifying system information backup / restore" on page 77
Ê "Verifying the system time settings" on page 89
14.3 USB Flash Module (UFM)
This section provides information on how to install, remove or replace the USB
Flash Module (UFM).
14.3.1 Installing the UFM
14.3.1.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Disabling SVOM boot watchdog functionality" on page 68
Ê "Locating the defective server" on page 49
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Software: 5 minutes
Tools: tool-less