1
Power-off
indicator (AC
connected)
green on server is switched on and running
off
server is switched off, but mains voltage
is present (standby mode)
I After connecting the server to the
mains it takes about 60 secondes
until the server enters the
standby mode.
green
flashing
slowly (1/2
Hz)
flashes slowly if iR4MC S is not ready.
I This description is only valid for
systems with iRMC FW 7.3.xF
and higher!
2
Power-on
indicator
off
– the system is not connected to the
mains
– the system is powered on and in
normal operation (S0)
green
– the system is in power-off mode but
connected to the mains (AC
connected)
– the system has been switched on
and is in power-on delay
I After connecting the server to
the mains it takes about 60
secondes until the server
enters the standby mode.
Pos. Indicator Status Description
To Next Page
Loading...
