4-60 F650 DIGITAL BAY CONTROLLER GEK-106310-AF
4.2 HUMAN-MACHINE INTERFACE (HMI) CHAPTER 4: INTERFACES, SETTINGS & ACTUAL VALUES
Esc: Prev.
Pressing the ESC key, the user returns to the previous screen (Metering screen)
Intro: Menu.
Pressing the enter/shuttle key, the user accesses the Events menu that offers the following options at the bottom of the
screen:
nextprevreloaddetailsAt
To access the different options in the snapshot events graphic menu the user must move the cursor from up to down or
from left to right. The selected option is displayed in upper case and between brackets. To access the selected option, the
user must press again the enter/shuttle key.
<NEXT>
The user accesses the next available graphic screen (Events – New)
<PREV>
This option returns to the general events graphic menu (All Events)
<RELOAD>
This option updates all events stored in the relay and returns to the general events screen.
<DETAILS>
The Details screen provides access to metering values, and date and time related with the event.
The top of the screen displays a legend with the event text, followed by the date and time, the event status (ON or
OFF), and the event index number related to the complete list of events in the relay, for example (1/479). The rest of
information provided by the Details screen corresponds to the relay measures in the moment of the event. Metering
values provided in the events are secondary, and voltage values correspond to phase-to-ground voltage.
Figure 4-35: Snapshot events details screen
To navigate this screen the user must follow the legend at the bottom of the screen:
Enter: Meters. ESC: Prev. : Scroll.
Ready LED ON
Date: 07/Nov/2004 St:ON
Time: 16:11:08.035 (1/479)
Phasor Ia Primary 0.000
Phasor Ib Primary 0.000
Phasor Ic Primary 0.000
Line Frequency 0.000
Phasor Ig Primary 0.000
Phasor Isg Primary 0.000
I0 Primary 0.000
I1 Primary 0.000
Enter: Meters. ESC: Prev
: Scroll.
To Next Page
Loading...