GE Multilin F650 - I.1 Factory Default Settings

GEK-106310-AF F650 DIGITAL BAY CONTROLLER i-1
F650 Digital Bay Controller
Appendix I: Factory default configuration
GE
Grid Solutions
FACTORY DEFAULT CONFIGURATION
I.1 Factory default settings
Product Setup > Communication Settings > Serial Ports
Setting Description Name Default Value Step Range
User
Value
Baud rate for COM1 COM1 Baud Rate 19200 N/A [300 : 115200]
Baud rate for COM2 COM2 Baud Rate 19200 N/A [300 : 115200]
Parity for COM1 COM1 Parity NONE N/A [NONE:ODD:EVEN]
Parity for COM2 COM2 Parity NONE N/A [NONE:ODD:EVEN]
Product Setup > Communication Settings > Network (Ethernet)
Network (Ethernet)1 > Network (Ethernet)2
Setting Description Name Default Value Step Range
User
Value
1st octet of IP address IP Address Oct1 0 N/A [0 : 255]
2nd octet of IP address IP Address Oct2 0 N/A [0 : 255]
3rd octet of IP address IP Address Oct3 0 N/A [0 : 255]
4th octet of IP address IP Address Oct4 0 N/A [0 : 255]
1st octet of Netmask Netmask Oct1 0 N/A [0 : 255]
2nd octet of Netmask Netmask Oct2 0 N/A [0 : 255]
3rd octet of Netmask Netmask Oct3 0 N/A [0 : 255]
4th octet of Netmask Netmask Oct4 0 N/A [0 : 255]
1st octet of Gateway Ga teway IP Oct 1 0 N/A [0 : 255]
2nd octet of Gateway Ga te way IP Oct 2 0 N/A [0 : 255]
3rd octet of Gateway Ga teway IP Oct3 0 N/A [0 : 255]
4th octet of Gateway Ga teway IP Oct4 0 N/A [0 : 255]
**For firmware versions 7.00 or higher; the Network settings are the ethernet communication parameters are as follow