GE Multilin F650 - IEC 61850 Profile for F650; Overview

To Next Page

To Previous Page

CHAPTER 7: IEC 61850 PROTOCOL 7.2 IEC 61850 PROFILE FOR F650

GEK-106310-AF F650 DIGITAL BAY CONTROLLER 7-7

7.2 IEC 61850 profile for F650

7.2.1 Overview

IEC 61850 is a series of standards describing client/server and peer-to-peer communications, substation design and

configuration, testing, environmental and project standards.

The 10 parts of the standard IEC 61850 are as listed in the following tables:

The following parts define how the IED behaves:

These documents can be obtained from the IEC (ht

tp://www.iec.ch). It is strongly recommended that all those involved with

any IEC 61850 implementation obtain this document set.

1.1.1 System Aspects

Part 1: Introduction and Overview

Part 2: Glossary

Part 3: General Requirements

Part 4: System and Proj

ect Management

Part 5: Communication Requirements for Functions and Device Models

1.1.2 Configuration

Part 6: Configuration Description Language F

or Communication In Electrical

Substations Related To IEDs

1.1.3 Testing

Part 10: Conformance Testing

1.1.4 Data Models

Basic Communication Structure for Substations and Feeder Equipment

Part 7-4: Compatible Logical Node Classes and Data Classes

Part 7-3: Common Data Classes

1.1.5 Abstract Communications

Basic Communication Structure for Substations and Feeder Equipment

Part 7-2: Abstract Communication Services

Interface (ACSI)

Part 7-1: Principles and Models

1.1.6 Mapping to real Communication Networks (SCSM)

Specific Communication Service Mapping (SCSM)

Part 8-1: Mappings to MMS

(ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3

Part 9-1: Sampled Values Over Serial Unidirectional Multidrop Point to Point Link

Part 9-2: Sampled values over ISO/IEC 8802-3

Mapping on a IEEE 8802-3 based Process Bus