EasyManua.ls Logo

GE Multilin F650 - Switchgear Status

GE Multilin F650
1046 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 6: ACTUAL VALUES 6.2 STATUS
GEK-106310-AF F650 DIGITAL BAY CONTROLLER 6-25
6.2.8 Switchgear status
Actual > Status > Switchgear Status
For a better understanding of the represented statuses in this screen, figure 6.1 shows the available “Switchgear” modules
to be programmed in the F650. Each of them has a series of inputs/outputs that are the statuses represented on this
screen. Separate signal for each switchgear device (for 1 to 16).
Each Switchgear module can be programmed at: Setpoint > Relay Configuration >Switchgear, and its statuses are as
follows:
Table 6-27: Switchgear status
SWITCH X A INPUT The LED lights up when the input associated with switchgear Contact A is activated.
SWITCH X B INPUT The LED lights up when the input associated with switchgear Contact B is activated.
SWITCH X A STATUS Status associated with Switchgear contact A. It is activated once the time required for the
Switchgear module to acknowledge contact A has expired.
SWITCH X B STATUS Status associated with Switchgear contact B. It is activated once the time required for the
Switchgear module to acknowledge contact B has expired.
SWITCH X OPEN Lights up when the associated switchgear is open
SWITCH X CLOSED Lights up when the associated switchgear is closed
SWITCH X 00_ERROR Output that represents the Switchgear status 00, considered as abnormal.
SWITCH X 11_ERROR Output that represents the Switchgear status 11, considered as abnormal.
SWITCH X OPEN INIT Programmable input that indicates the initiation of the Opening Operation for the considered
switchgear.
SWITCH X CLOSE INIT Programmable input that indicates the initiation of the closing Operation for the considered
switchgear.
SWGR X FAIL TO OPEN Output that represents a failure to open, from the associated external device (opening time
exceeded)
SWGR X FAIL TO CLOSE Output that represents a failure to close from the associated external device (closing time
exceeded)
SWITCHGEAR 1 STATUS SWITCHGEAR X STATUS SWITCHGEAR 16 STATUS
SWITCH 1 A INPUT SWITCH X A INPUT SWITCH 16 A INPUT
SWITCH 1 B INPUT SWITCH X B INPUT SWITCH 16 B INPUT
SWITCH 1 A STATUS SWITCH X A STATUS SWITCH 16 A STATUS
SWITCH 1 B STATUS SWITCH X B STATUS SWITCH 16 B STATUS
SWITCH 1 OPEN SWITCH X OPEN SWITCH 16 OPEN
SWITCH 1 CLOSED SWITCH X CLOSED SWITCH 16 CLOSED
SWITCH 1 00_ERROR SWITCH X 00_ERROR SWITCH 16 00_ERROR
SWITCH 1 11_ERROR SWITCH X 11_ERROR SWITCH 16 11_ERROR
SWITCH 1 OPEN INIT SWITCH X OPEN INIT SWITCH 16 OPEN INIT
SWITCH 1 CLOSE INIT SWITCH X CLOSE INIT SWITCH 16 CLOSE INIT
SWGR 1 FAIL TO OPEN SWGR X FAIL TO OPEN SWGR 16 FAIL TO OPEN
SWGR 1 FAIL TO CLOSE SWGR X FAIL TO CLOSE SWGR 16 FAIL TO CLOSE

Table of Contents