GE Multilin F650 - Configuration Generation; Add Input to Automation; Create Equation; Create New Project

CHAPTER 5: SETPOINTS 5.10 LOGIC CONFIGURATION (PLC EDITOR)
GEK-106310-AF F650 DIGITAL BAY CONTROLLER 5-181
Edit menu
The Edit menu includes the following options:
Undo: Undo the last modification in the active function.
Redo: Repeat the last modification.
Cut: Cut one or more logic operations.
Copy: Copy one or more logic operations.
Paste: Paste one or more logic operations.
Find: Search for a logic operation in the project.
Copy as Bitmap: Copy the active automatic function to the clipboard in picture format.
View Clipboard: Launch the clipboard viewer application.
Run menu
The RUN menu includes the following options:
Configuration: Not valid in the current application (for analog operations still not available).
Compile: Compile the configuration functions to generate the equations that are interpreted
by the 650 PLC.
Send Equations to Relay
View menu
The VIEW menu includes the following options:
Log: Display the status name and time stamp of the digital statuses configured in the
PLC logic (still not available).
Equations: Display the equations resulting from the compilation.
Grid: Show or hide the form grid where the configuration functions are developed. It
also aligns the different objects to the grid.
Zoom: Allow selection of the percentage of zoom in the application.
Rectangle Zoom (Zoom rectangular): Allow zooming the selected rectangle.
5.10.3 Configuration generation
5.10.3.1 Create new project
Click File > New Project to open a new PLC project for programming the desired automation. An automation can be
formed by one or more equations.
5.10.3.2 Create equation
A single equation can be formed by one or more inputs, one or more operations, and one output.
The order of equations is determined by the relative position of their respective outputs, this order being downward.
To link the output of an equation with the input of another equation, an internal variable (virtual output) must be used.
The virtual output is used as an input to the second equation.
5.10.3.3 Add input to automation
Click the button that represents the inputs in the toolbar at the top of the screen. A logic input can be any of the available
digital internal status provided by the relay. Such as protection status, contact inputs, contact outputs, I/O status, other
protection status, front keys, LEDs, operation bits, virtual inputs and virtual outputs.