CHAPTER 2: PRODUCT DESCRIPTION 2.5 TECHNICAL SPECIFICATIONS
GEK-106310-AF F650 DIGITAL BAY CONTROLLER 2-25
2.5.10 Communications
FRONT PORT:
Front port: COM2
Type: RS232/USB
Baud Rate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200 baud
Default Baud Rate: 19200 baud
Protocols: ModBus
®
RTU/DNP 3.0
Typical Distance: 3 m
Isolation: 2 kV
ASYNCHRONOUS REAR PORTS:
None or two rear ports (depending on model): COM1, COM2 (rear COM2 multiplexed with front port)
Type (depending on model):
Model F None
Model A Redundant RS485
Model X Redundant RS485 + fiber CAN for inputs/outputs module
Model P Redundant 1mm-plastic F.O.
Model Y Redundant 1mm-plastic F.O. + fiber CAN for inputs/outputs module
Model G Redundant multimode glass F.O.
Model Z Redundant multimode glass F.O. + fiber CAN for inputs/outputs module
Model C Cable CAN port for I/O module
Model M Cable CAN port for I/O module (cable) + RS485 (ModBus RTU)
Optic Features for ST Connector Devices: Wave length: 1300nm
Fiber type: multimode 62.5/125 μm or 50
/125 μm
Baud Rate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200 baud
Default Baud Rate: 19200 baud
Protocols: ModBus
®
RTU/DNP 3.0/IEC103
Typical Distance: 1200 m for cooper cable, 1000 m for glass fiber
and 50 m for plastic fiber
Isolation: 2 kV
CAN PORT:
Rear Port: CAN port in models C, M, X, Y, Z for asynchronous rear ports
Type: Multimode glass F.O. port with ST connectors
Fiber Wavelength: 820 nm
Fiber Type: multimode 62.5/125 μm or
50/125 μm
Maximum Recommended Length: 300 m for cooper cable and glass fiber
Isolation: 2 kV
ETHERNET PORT:
Rear port:
For models B, C, D, E: ETH_1/ ETH_2
For models G, H, J, K, L, M: ETH_E/ ETH_A/ ETH_B
Type (depending on model):
Model B: 10/100BaseTX self-negotiable
Model C: 10/100BaseTX + 100Base FX
Model D: 10/100BaseTX + redundant 100BaseFX (Physical media redundancy)
Model E: Redundant 10/100BaseTX self-negotiable ports
Model G: 1588, 10/100 Base TX* + 100 Base TX
Model H: 1588, 10/100 Base TX* + 100 Base FX
Model J: PRP, 1588, 10/100 Base TX* + Redundant 100 Base FX
Model K: PRP, HSR, RSTP, 1588, 10/100 Base TX* + Redundant 100 Base FX
Model L: PRP, 1588, 10/100 Base TX* + Redundant 100 Base TX
Model M: PRP, HSR, RSTP, 1588, 10/100 Base TX* + Redundant 100 Base TX
(*) Note: This Ethernet port (ETH_E) is intended o
nly for maintenance purposes.
To Next Page
Loading...