GE Multilin F650 - Page 933

APPENDIX C: DNP 3.0 PROTOCOL FOR F650 C.2 DNP 3.0 DEVICE PROFILE DOCUMENT
GEK-106310-AF F650 DIGITAL BAY CONTROLLER c-7
DNP V3.00 DEVICE PROFILE DOCUMENT (Sheet 3 of 3)
Reports Binary Input Change Events when no specific
variation requested:
 Never
 Only time-tagged
 Only non-time-tagged
 Configurable
Reports time-tagged Binary Input Change Events when no
specific variation requested:
 Never
 Binary Input Change With Time
 Binary Input Change With Relative Time
 Configurable (attach explanation)
Sends Unsolicited Responses:
 Never
 Configurable
 Only certain objects
 Sometimes (attach explanation)
 ENABLE/DISABLE unsolicited Function codes
supported
Sends Static Data in Unsolicited Responses:
 Never
 When Device Restarts
 When Status Flag Change
No other options permitted
Explanation of ‘Sometimes’: It will be disabled for RS-
485 applications, since there is no collision avoidance
mechanism. For ethernet communication it will be
available and it can be disabled or enabled with the
proper function code.
Default CounterObject/Variation:
 No Counters Reported
 Configurable (attach explanation)
 Default Object: 20.
Default Variation: 1
 Point-by-point list attached
Counters Roll Over at:
 No Counters Reported
 Configurable (attach explanation)
 16 Bits
 32 Bits
 Other Value: ______
 Point-by-point list attached
Sends Multi-Fragment Responses:
 Yes
 No