4-14 F650 DIGITAL BAY CONTROLLER GEK-106310-AF
4.1 ENERVISTA 650 SETUP SOFTWARE CHAPTER 4: INTERFACES, SETTINGS & ACTUAL VALUES
For example, if the Phase TOC High element is configured in the source *.650 file as described below:
1. Note that fields in blue contain default values
CASE 1: If the setting groups option is disabled (Setpoint > Control Elements > Setting group) in the source file, conversion
is performed in the destination file as follows:
• Settings of different elements (Phase TOC High 1, 2 and 3) that belong to Setting group 1(SG1) in the source file are
copied into elements that belong to Setting Group 1 in the destination file.
• Elements in the other setting groups are configured with default values in the configuration file.
CASE 2: If the setting groups option is enabled (Setpoint > Control Elements > Setting group) in the source file, conversion
to the destination file is as follows:
• Settings of different elements (Phase TOC High 1, 2 and 3) that belong to different setting groups in the source file are
copied into elements that belong to first group of first three setting groups in the destination file
• Protection elements in the other groups/setting groups are conf
igured with default values in the destination file.
Phase TOC High Phase TOC High 1 (G1) Phase TOC High 2
(G2)
Phase TOC High 3(G3)
Function ENABLED ENABLED ENABLED
Input PHASOR(DFT) PHASOR(DFT) PHASOR(DFT)
Pickup Level 0.10 1.50 2.00
Curve Definite time Definite time Definite time
TD Multiplier 0.02 0.05 0.1
Reset
INSTANTANEOUS INSTANTANEOUS INSTANTANEOUS
Voltage Restraint
DISABLED DISABLED DISABLED
Snapshot Events
ENABLED ENABLED ENABLED
SG1 SG2 SG3 SG4 SG5 SG6
Phase TOC High G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3
Function ENABLED DISABLED
Input PHASOR(DFT)
Pickup Level 0.10 1.50 2.00 1.00
Curve Definite time IEEE Ext Inv
TD Multiplier 0.02 0.05 0.10 1.00
Reset INSTANTANEOUS
Voltage
Restraint
DISABLED
Snapshot Events ENABLED
SG1 SG2 SG3 SG4 SG5 SG6
Phase TOC High G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3
Function
ENABLED DISABLED ENABLED DISABLED ENABLED DISABLED
Input PHASOR(DFT)
Pickup Level
0.10
1.00
1.50 1,00 2.00 1.00
Curve
Definite
time
IEEE Ext
Inv
Definite time IEEE Ext Inv Definite time IEEE Ext Inv
TD Multiplier
0.02 1.00 0.05 1,00 0.10 1.00
Reset INSTANTANEOUS
Voltage
Restraint
DISABLED
Snapshot
Events
ENABLED
To Next Page
Loading...