BGS2T AT Command Set
4.9 AT+ICF
BGS2T_ATC_V01.301 Page 108 of 554 1/31/12
c
Parameter Description
Specifies the character format used for receiving and transmitting.
1 8 data 0 parity 2 stop
2 8 data 1 parity 1 stop
3
(&F)(D)
8 data 0 parity 1 stop
5 7 data 1 parity 1 stop
Specifies the method of calculating the parity bit, if a parity bit is supported by <format>.
If <format> does not support parity, this parameter has to be omitted.
0odd
1 even
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
- + ± ± ± - + V.250
<format>
(num)(&W)(&V)
<parity>
(num)(&W)(&V)
To Next Page
Loading...
