BGS2T AT Command Set
10.4 AT^SISS
BGS2T_ATC_V01.301 Page 256 of 554 1/31/12
c
If "url-path" contains only the IP address a directory listing is requested.
If "url-path" contains the IP address and has a slash '/' appended a detailed
directory listing is requested.
"type": [a)scii | i)mage | d)irectory]
"mode": [u)nique | a)ppend | d)elete]
"u)nique" selects the FTP Store Unique command to create a file name
unique to the current directory. If the file name is assigned by the server
then the "^SIS" URC will appear, indicating <urcInfoId> 2100 and the
file name.
"d)elete" clears given 'element name'.
If "mode" is omitted "replace mode" is default setting.
4. HTTP
HTTP client URL
Length: 6 ... 255
"http://'server'/'path':'tcpPort' "
"server": FQDN or IP-address
"path": path of file or directory
"tcpPort": If parameter is omitted the service connects to HTTP default port
80.
Refer to "IETF-RFC 2616".
5. SMTP
SMTP server address (string).
Length: 4 ... 256.
6. POP3
POP3 server address (string).
Length: 4 ... 256.
hcContent Optional parameter for HTTP method "Post".
Length: 0 ... 127
Can be used to transfer a small amount of data. The content of this string will
only be sent if "hcContLen" = 0. The maximum length of "hcContent" is 127
bytes.
To transmit a larger amount of data "hcContLen" must be set to a non-zero
value. In this case the "hcContent" string will be ignored, and data transmission
from the client to the server is done with AT^SISW.
hcContLen Mandatory parameter for HTTP method "Post".
Length: 0 ... 2
31
-1
The content length shall be set in the header of the HTTP "Post" request before
the data part is transferred.
If "hcContLen" = 0 then the data given in the "hcContent" string will be posted.
If "hcContLen" > 0 then the AT^SISW command will be used to send data from
the client to the server. In this case, "hcContLen" specifies the total amount of
data to be sent. The data can be sent in one or several parts. For each part,
the transmission is triggered by the URC "^SISW: x, 1", then the AT^SISW write
command can be executed. After the exact number of bytes are transferred via
the serial interface, the HTTP client will go from service state "Up" to service
state "Closing" (see parameters <srvState> and <srvState> for detail).
Finally, the URC "^SISW: x, 2" indicates that all data have been transferred and
the service can be closed with AT^SISC.
hcUsrAgent The user agent string must be set by the application to identify the mobile. Usu-
ally operation system and software version info is set with this browser identi-
fier.
Length: 0 ... 63
hcMethod HTTP method specification: 0=GET, 1=POST, 2=HEAD.
hcProp Parameter for several HTTP settings.
Length: 0 ... 127
The general format is 'key': <space> 'value'
Multiple settings can be given separated by "\0d\0a" sequences within the
string, do not put them at the end.
Possible 'key' values are defined at HTTP/1.1 Standard RFC 2616.
To Next Page
Loading...
Need help?
General
