BGS2T AT Command Set
11.7 AT+CGEQMIN
BGS2T_ATC_V01.301 Page 309 of 554 1/31/12
c
0 conversational
1 streaming
2 interactive
3 background
[4] subscribed value
This parameter indicates the maximum number of kbits/s delivered to UMTS (up-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQMIN=...,32,...).
[0] subscribed value
1...63
64...568 (value needs to be divisible by 8 without remainder)
576...8640 (value needs to be divisible by 64 without remainder)
This parameter indicates the maximum number of kbits/s delivered by UMTS (down-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQMIN=...,32,...).
[0] subscribed value
1...63
64...568 (value needs to be divisible by 8 without remainder)
576...8640 (value needs to be divisible by 64 without remainder)
This parameter indicates the guaranteed number of kbits/s delivered to UMTS (up-link traffic) at a SAP (provided
that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQ-
MIN=...,32,...).
[0] subscribed value
1...63
64...568 (value needs to be divisible by 8 without remainder)
576...8640 (value needs to be divisible by 64 without remainder)
This parameter indicates the guaranteed number of kbits/s delivered by UMTS (down-link traffic) at a SAP (pro-
vided that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQ-
MIN=...,32,...).
[0] subscribed value
1...63
64...568 (value needs to be divisible by 8 without remainder)
576...8640 (value needs to be divisible by 64 without remainder)
This parameter indicates whether the UMTS bearer shall provide in-sequence SDU delivery or not.
0no
<Traffic class>
(num)
<Maximum bitrate UL>
(num)
<Maximum bitrate DL>
(num)
<Guaranteed bitrate UL>
(num)
<Guaranteed bitrate DL>
(num)
<Delivery order>
(num)
To Next Page
Loading...
