BGS2T AT Command Set
14.1 AT+CRSM
BGS2T_ATC_V01.301 Page 407 of 554 1/31/12
c
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
Identifier for an elementary data file on SIM, if used by <command>.
Parameter to be passed on by the BGS2T to the SIM.
0...255
Parameter to be passed on by the BGS2T to the SIM.
0...255
Parameter to be passed on by the BGS2T to the SIM.
0...255
Information which shall be written to the SIM (hexadecimal character format).
Contains the directory path of an elementary file on the UICC in hexadecimal format (e.g. "7F105F50").
Status information from the SIM about the execution of the actual command. It is returned in both cases, on suc-
cessful or failed execution of the command.
0...255
Status information from the SIM about the execution of the actual command. It is returned in both cases, on suc-
cessful or failed execution of the command.
0...255
Response data in case of a successful completion of the previously issued command.
"STATUS" and "GET RESPONSE" commands return data, which gives information about the currently selected
elementary data field. This information includes the type of file and its size.
After "READ BINARY" or "READ RECORD" commands the requested data will be returned.
<response> is empty after "UPDATE BINARY" or "UPDATE RECORD" commands.
<fileID>
(num)
<P1>
(num)
<P2>
(num)
<P3>
(num)
<data>
(str)
<pathId>
(str)
<sw1>
(num)
<sw2>
(num)
<response>
(str)
To Next Page
Loading...
Need help?
General
