IBM Storwize V7000 Unified Problem Determination Guide

v Run a fix procedure.
v View the properties.
Unfixed messages and alerts
Displays only the alerts and messages that are not fixed. For each entry
that is selected, you can:
v Run a fix procedure on any alert with an error code.
v Mark an event as fixed.
v Filter the entries to show them by specific minutes, hours, or dates.
v Reset the date filter.
v View the properties.
Show all
Displays all event types whether they are fixed or unfixed. For each entry
that is selected, you can:
v Run a fix procedure on any alert with an error code.
v Mark an event as fixed.
v Filter the entries to show them by specific minutes, hours, or dates.
v Reset the date filter.
v View the properties.
Some events require a certain number of occurrences in 25 hours before they are
displayed as unfixed. If they do not reach this threshold in 25 hours, they are
flagged as expired. Monitoring events are below the coalesce threshold and are
usually transient.
You can also sort events by time or error code. When you sort by error code, the
most serious events, those with the lowest numbers, are displayed first. You can
select any event that is listed and select Actions > Properties to view details about
the event.
v Recommended Actions. For each problem that is selected, you can:
– Run a fix procedure.
– View the properties.
v Event log. For each entry that is selected, you can:
– Run a fix procedure.
– Mark an event as fixed.
– Filter the entries to show them by specific minutes, hours, or dates.
– Reset the date filter.
– View the properties.
When to use the management GUI
The management GUI is the primary tool that is used to service your system.
Regularly monitor the status of the system using the management GUI. If you
suspect a problem, use the management GUI first to diagnose and resolve the
problem.
Use the views that are available in the management GUI to verify the status of the
system, the hardware devices, the physical storage, and the available volumes. The
88 Storwize V7000 Unified: Problem Determination Guide 2073-720

IBM Storwize V7000 Unified Specifications

General

Model	IBM Storwize V7000 Unified
Storage Type	Unified Storage
RAID Levels	RAID 0, 1, 5, 6, 10
Form Factor	2U
Drive Types Supported	SAS, SSD
Maximum Drives	504
Network Protocols	iSCSI, FC, FCoE
Drive Bays	24 per enclosure
Host Interface	8 Gb FC, 1 Gb/10 Gb iSCSI
File Protocols	NFS, CIFS
Block Protocols	iSCSI, Fibre Channel
Type	Unified Storage
Maximum Host Ports	16
Operating System Support	VMware, Microsoft Windows, Linux, AIX
Data Services	Thin provisioning, replication
Power Supply	Redundant power supplies
Host Interfaces	8 Gbps Fibre Channel, 10 Gbps iSCSI, 1 Gbps iSCSI