About this task
This recovery procedure starts the sshd_data when it is down.
Procedure
1. Log in as a CLI user with privileged authority.
2. Issue the service sc sshd_data start command.
3. If the problem persists, restart the node.
4. If the restart action does not resolve the issue, contact the next level of support.
Recovering from an sshd_int service error
Use this procedure to recover from an sshd_int service error.
About this task
This recovery procedure starts the sshd_int when it is down.
Procedure
1. Log in as a CLI user with privileged authority.
2. Issue the service sc sshd_int start command.
3. If the problem persists, restart the node.
4. If the restart action does not resolve the issue, contact the next level of support.
Recovering from an sshd_mgmt service error
Use this procedure to recover from an sshd_mgmt service error.
About this task
This recovery procedure starts the sshd_mgmt when it is down.
Procedure
1. Log in as a CLI user with privileged authority.
2. Issue the service sc sshd_mgmt start command.
3. If the problem persists, restart the node.
4. If the restart action does not resolve the issue, contact the next level of support.
Recovering from an sshd_service service error
Use this procedure to recover from an sshd_service service error.
About this task
This recovery procedure starts the sshd_service when it is down.
Procedure
1. Log in as a CLI user with privileged authority.
2. Issue the service sc sshd_service start command.
3. If the problem persists, restart the node.
4. If the restart action does not resolve the issue, contact the next level of support.
Chapter 7. Recovery procedures 409
To Next Page
Loading...
Need help?
General
