IBM Storwize V7000 Unified Problem Determination Guide

I for Asynchronous Replication
J for SCM
L for HSM
AK for NDMP
v The element nnnn is a 4 digit message number
v The element x indicates the severity of the error. The value x can be:
A for Action: GUI error messages. The user must perform a specific action.
C for Critical: A critical error occurred which must be corrected by the user
or system administrator.
D for Debug: Used only for debug purposes.
I for Informational: No operation action required.
W for Warning: An error occurred that can cause problems in the future. The
problem should be investigated and fixed.
.
File module hardware problems
This section helps you to identify and resolve file module hardware problems.
Chapter 4. File module 121

IBM Storwize V7000 Unified Specifications

General

Model	IBM Storwize V7000 Unified
Storage Type	Unified Storage
RAID Levels	RAID 0, 1, 5, 6, 10
Form Factor	2U
Drive Types Supported	SAS, SSD
Maximum Drives	504
Network Protocols	iSCSI, FC, FCoE
Drive Bays	24 per enclosure
Host Interface	8 Gb FC, 1 Gb/10 Gb iSCSI
File Protocols	NFS, CIFS
Block Protocols	iSCSI, Fibre Channel
Type	Unified Storage
Maximum Host Ports	16
Operating System Support	VMware, Microsoft Windows, Linux, AIX
Data Services	Thin provisioning, replication
Power Supply	Redundant power supplies
Host Interfaces	8 Gbps Fibre Channel, 10 Gbps iSCSI, 1 Gbps iSCSI