Table 109. Replaceable units (continued)
Part Part number
Applicable
models
FRU or customer
replaced
2.5" flash drive, 200 GB drive, in
carrier assembly
85Y6188 124, 224, 324 Customer
replaced
2.5" flash drive, 400 GB drive, in
carrier assembly
85Y6189 124, 224, 324 Customer
replaced
2.5" flash drive, 800 GB drive, in
carrier assembly
00AR252 124, 224, 324 Customer
replaced
3.5" 7.2 K Nearline SAS - 2 TB
in carrier assembly
85Y5869 112, 212, 312 Customer
replaced
3.5" 7.2 K Nearline SAS - 3 TB
in carrier assembly
85Y6187 112, 212, 312 Customer
replaced
3.5" 7.2 K Nearline SAS - 6 TB
in carrier assembly
00RX918 112, 212, 312 Customer
replaceable.
Requires system
software version
7.4 or later.
Blank 2.5" carrier 85Y5893 124, 224, 324 Customer
replaced
Blank 3.5" carrier 85Y5894 112, 212, 312 Customer
replaced
Fibre Channel shortwave small
form-factor pluggable (SFP)
85Y5958 112, 124, 312, 324 Customer
replaced
Fibre Channel longwave small
form-factor pluggable (SFP)
85Y5957 112, 124, 312, 324 Customer
replaced
Ethernet small form-factor
pluggable (SFP)
31P1549 312, 324 Customer
replaced
Rail kit 85Y5852 All Customer
replaced
Left enclosure cap including
RID tag but no black MTM label
85Y5901 All Customer
replaced
Right enclosure cap (2U12) 85Y5903 112, 212, 312 Customer
replaced
Right enclosure cap (2U24) 85Y5904 124, 224, 324 Customer
replaced
Replacing parts
You can remove and replace customer-replaceable units (CRUs) in control
enclosures or expansion enclosures.
Attention: Even though many of these components are hot-swappable, they are
intended to be used only when your system is not active (no I/O operations). If
your system is powered on and processing I/O operations, go to the management
GUI and follow the fix procedures. Initiating the replacement actions without the
assistance of the fix procedures can result in loss of data or loss of access to data.
294 Storwize V7000 Unified: Problem Determination Guide 2073-720