IBM Storwize V7000 Unified Problem Determination Guide

Storwize V7000 Unified Gen2 refers to the newer generation of enclosures in the
following table:
Table 111. Storwize V7000 Unified Gen2 model numbers
Machine
type/model Description
2076-524 Storwize V7000 Unified control enclosure, with up to 24 2.5-inch (6.35
cm) drives
2076-12F Storwize V7000 Unified expansion enclosure for up to 12 3.5-inch (8.89
cm) drives
2076-24F Storwize V7000 Unified expansion enclosure for 2.5-inch drives
Replacing a Storwize V7000 Gen2 control enclosure
You can replace a control enclosure.
Before you begin
Note: Ensure that you know the type of enclosure that you are replacing. The
procedures for replacing a control enclosure are different from those procedures for
replacing an expansion enclosure chassis. For information about replacing an
expansion enclosure, see “Replacing an expansion enclosure chassis” on page 343.
Chapter 5. Control enclosure 333

IBM Storwize V7000 Unified Specifications

General

Model	IBM Storwize V7000 Unified
Storage Type	Unified Storage
RAID Levels	RAID 0, 1, 5, 6, 10
Form Factor	2U
Drive Types Supported	SAS, SSD
Maximum Drives	504
Network Protocols	iSCSI, FC, FCoE
Drive Bays	24 per enclosure
Host Interface	8 Gb FC, 1 Gb/10 Gb iSCSI
File Protocols	NFS, CIFS
Block Protocols	iSCSI, Fibre Channel
Type	Unified Storage
Maximum Host Ports	16
Operating System Support	VMware, Microsoft Windows, Linux, AIX
Data Services	Thin provisioning, replication
Power Supply	Redundant power supplies
Host Interfaces	8 Gbps Fibre Channel, 10 Gbps iSCSI, 1 Gbps iSCSI