79. Rear of node canisters that shows the
handles. ............. 297
80. Removing the canister from the enclosure 297
81. Removing and replacing the Storwize V7000
Gen2 expansion canister ........ 300
82. Rear of expansion canisters that shows the
handles. ............. 301
83. Removing the canister from the enclosure 302
84. SFP transceiver ........... 303
85. SFP transceiver ........... 305
86. Removing the power supply unit (left side of
enclosure)............. 306
87. Directions for lifting the handle on the power
supply unit ............ 309
88. Using the handle to remove a power supply
unit ............... 309
89. Removing the power supply unit from the
left side of the expansion enclosure .... 311
90. Directions for lifting the handle on the power
supply unit ............ 314
91. Using the handle to remove a power supply
unit ............... 314
92. Opening latching arms to disconnect a
Storwize V7000 Gen2 node canister battery . 316
93. Removing the battery from the control
enclosure power-supply unit ...... 319
94. Unlocking and removing a 3.5-inch drive
from its slot ............ 322
95. Installing and locking a 3.5-inch drive into its
slot ............... 322
96. Unlocking the 3.5 inch drive ...... 323
97. Removing the 3.5 inch drive ...... 324
98. Unlocking and removing a 2.5-inch drive
from its slot ............ 326
99. Installing and locking a 2.5-inch drive into its
slot ............... 326
100. Unlocking the 2.5 inch drive ...... 327
101. Removing the 2.5 inch drive ...... 328
102. Proper orientation for SAS cable connector 331
103. SAS cable ............. 332
104. Bottom enclosure screws ........ 355
105. Right-side enclosure screws ....... 356
106. Left-side enclosure screws ....... 356
107. Angled midplane assembly ....... 357
108. Removing a vertical style hard disk drive 359
109. Removing a horizontal style hard disk drive 360
110. Removing the screws of an expansion
enclosure assembly ......... 361
111. Opening rear hinge bracket of mounting rail 364
112. Compressing rail for removal from rack 365
113. Opening rear hinge bracket of mounting rail 367
114. Compressing rail for removal from rack 368
115. Removing a rail assembly from a rack cabinet 369
116. Installing a Storwize V7000 2076-524 node
canister memory module........ 370
117. Removing the host interface adapter .... 372
118. Installing the host interface adapter .... 373
119. Replacing a CMOS Gen2 battery ..... 375
viii Storwize V7000 Unified: Problem Determination Guide 2073-720
To Next Page
Loading...
Need help?
General
