Table 34. Error messages and actions (continued)
Error code Error message Action key
0A0D Error querying settings through ASU. B
0A0E Error setting ASU command. B
0A0F Unable to determine adapter name from VPD. A
0A10 Unable to open the ifcfg file. A
0A11 Unable to write to the ifcfg file. A
0A12 Unable to bring adapter down. A
0A13 Unable to bring adapter up. D then C then B
0A14 Unable to determine adapter name from VPD. A
0A15 Unable to open the ifcfg-alias file. A
0A16 Unable to write to the ifcfg-alias file. A
0A17 Unable to bring adapter-alias down. A
0A18 Unable to bring adapter-alias up. D then C then B
0A19 Unable to retrieve adapter name. A
0A1A Incorrect parameters. D
0A1B Adapter value not valid. A
0A1C Alias value not valid. A
0A1D DHCP is not valid on this adapter. A
0A1E DHCP is not valid on aliases. A
0A1F Invalid IP address. D
0A20 Invalid netmask. D
0A21 Invalid Gateway IP Address. D
0A22 Gateway, netmask, and IP are incompatible. D
0A23 Gateway is not valid on this adapter. D
0A24 Alias is null. A
0A25 Could not drop aliases. A
0A26 Invalid adapter for Storwize V7000. A
0A27 Invalid alias state argument. A
0AA5 Invalid inputs. A
0AA6 Called with invalid host name. A
0AA7 Error sending password. A
0AA8 A node name was not provided. A
0AA9 Invalid management IP address. A
0AAB Invalid RSA IP address. A
0AAC Invalid IP for management node. A
0AAD The node is already a part of a cluster. A
0AAE Error while setting storage node peer. A
0AAF Unable to get node roles from VPD. A
0AB0 Error opening /etc/sysconfig/rsyslog. A
0AB1 Error writing to /etc/sysconfig/rsyslog. A
0AB2 Error reading /etc/rsyslog.conf. A
Chapter 3. Getting started troubleshooting 53
To Next Page
Loading...
Need help?
General
