Table 34. Error messages and actions (continued)
Error code Error message Action key
0ADB Unable to open /proc/scsi/scsi. B
0AF8 Trying to install management stack on
non-management node.
A
0AF9 Invalid site ID. Curently only 'st001' is supported on
physical systems.
A
0AFA This node is already a part of a cluster. Unable to
configure.
E
0AFB Unable to generate public/private keys. A
0AFC Unable to copy user SSH keys. A
0AFD Unable to copy host SSH keys. A
0AFE Unable to set the system's timezone. A
0AFF Unable to write clock file. A
0B00 Unable to write to /etc/ntp.conf. A
0B01 Unable to parse internal IP range. D
0B08 Unable to open dhcpd.conf template file. A
0B09 Unable to open dhcpd.conf for writing. A
0B0A Unable to copy dhcpd.conf to /etc/. A
0B0B Unable to copy tftp to /etc/xinetd.d. A
0B0E Unable to enable the TFTP server. A
0B12 sonas_setup_security is not present. A
0B13 No service IP provided. D
0B14 Unable to create RSA1 SSH keys. A
0B15 Unable to create RSA SSH keys. A
0B16 Unable to create DSA SSH keys. A
0B17 Exiting on trap. A
0B18 No controllers found in this cluster. A
0B2F Unable to set GPFS setting. Check logs for more
details.
A
0B30 Unable to query current GPFS settings from
mmlscluster.
A
0B31 There was an error while attempting to enable CTDB. A
0B32 Unable to query current GPFS settings mmlsconfig. A
0B33 Unable to open settings file. Check logs for more
details.
A
0B34 Invalid arguments passed to the script. A
0B4F add_new called with improper parameters. A
0B50 Invalid serial number. B
0B51 Invalid forced ID. A
0B52 Invalid site. A
0B53 Node with serial was not found in available list. B
0B54 Storage nodes must be added in pairs. Invalid peer
serial.
A
Chapter 3. Getting started troubleshooting 55
To Next Page
Loading...
Need help?
General
