Rev. 1
Page 3-
4
Alarm during a cycle
If the alarm intervenes during a program
, the display will show the message:
(Alarm Message)
LEVELLING...
114.6°C XXXX
0.70 bar 11:30
Whenever an alarm is generated in certain phases of the cycle, an automatic procedure is activated to clean the internal water circuit. The display
will contain the notice:
(Alarm Message)
CIRCUIT CLEANING
100.6°C XXXX
0.70 bar 11:40
At the end of what has been described and having reached safe conditions, the machine activates a special procedure, that asks the user to
manually unlock the door:
PRESS TO
UNLOCK THE DOOR
101.0°C XXXX
0.01 bar 11:40
Press the key to unlock the door lock mechanism; the following message appears:
(Alarm Message)
OPEN THE DOOR
100.8°C XXXX
0.01 bar 11:42
Depending on the alarm
Alarm code
Depending on the alarm
Alarm code
To Next Page
Loading...
