Mocom millennium B - H2 O CIRCUIT; Counter reset

Rev.1
Page 1-
46
MOCOM
(MOCOM item on the SERVICE menu)
This item is only accessible and available to the manufacturer:
H2O circuit
(H2O CIRCUIT item on the SERVICE menu)
This option allows the check of the hydraulic circuit and water filling operation. The following display is shown:
MANUAL FILLING OF
THE H20 CIRCUIT
↵ to activate
to exit
As confirmed by the ↵ key the water pump starts making possible to check the hydraulic circuit.
Counter reset
(COUNTER RESET item on the SERVICE menu)
This option allows to reset the counter (displayed on LCD) of the launched and completed cycles. The following display is shown:
RESET OF THE
USER COUNTER
↵ to reset
to exit
Confirm by the ↵ key to reset the counter.
Use this option only in special case.