Mocom millennium B - ACTIVATING CONFIGURATION OPTIONS - SPECIAL MENU; Adjusting the contrast of the liquid crystal display; ACTIVATING CONFIGURATION OPTIONS - SERVICE MENU

Rev.1
Page 1-
42
Adjusting the contrast of the liquid crystal display
(LCD CONTRAST on the SPECIAL menu)
The LCD contrast adjustment allow to obtain the screen reading as clear as possible, compensating different sterilizer positioning or ambient
brightness. When LCD CONTRAST is activated, this screen appears:
ADJUSTMENT OF THE
LCD CONTRAST
+/- to set
to exit
Press the + key increases the contrast while the - key decreases it.
Place yourself in your usual working position and adjust the contrast until the display is as clear and readable as possible.
ACTIVATING CONFIGURATION OPTIONS – SERVICE MENU
These menu options are only available to the authorized Service Technicians by entering of special code.
The following display is shown:
SERVICE
SERVICE CODE
↵ to confirm
to exit
Type the code + +
_ _
+ +
_ _
by using the relevant symbol keys. SERVICE menu includes the following options:
DEVICE TEST COUNTER RESET
TEST CYCLES FACTORY DATA
MOCOM TECHNICAL REPORT
H2O CIRCUIT PT1 CORRECTION
EXIT