Rev. 1
Page 2-
21
Drying
After the steam under pressure is released, its forced removal begins with the vacuum pump (DRYING): for this purpose, low pressure is created
in the sterilization chamber to facilitate the evaporation of the steam and its consequent elimination. As a function of the type of drying set, one of
the following screens will appear:
1 134°C POROUS
DRYING (NOR)
101.1 °C
0.00 bar 18:51
1 134°C POROUS
DRYING (INT)
101.1 °C
0.00 bar 18:51
1 134°C POROUS
DRYING (+XX)
101.1 °C
0.00 bar 18:51
Water
tank
DESCRIPTION
STATUSES
(P, t)
VP WP
EV1
(no)
EV2
(nc)
EV3
(nc)
EV4
EV5
(no)
EV6
(nc)
Fan
From 0,00 to –0,80 bar
ON OFF OFF OFF ON ON ON OFF ON
From -0,80 to –0,50 bar
ON OFF OFF OFF ON ON ON OFF ON
Drying
From -0,50 to –0,80 bar
ON OFF OFF OFF ON ON ON OFF ON
Standard drying
Intelligent drying
Extra drying
(+XX) = time set
To Next Page
Loading...
