Mocom millennium B - SEQUENCE OF THE PROCESS; Warmup

Rev. 1
Page 2-
11
Warmup
When the START button is pressed, the first phase is WARMUP, which brings the chamber to temperature required for starting the cycle. The
display shows the following:
1 134°C POROUS
WARMUP
23.9 °C
0.01 bar 00:00
CHAMBER
Water
tank
DESCRIPTION STATUSES PV PA
EV1
(no)
EV2
(nc)
EV3
(nc)
EV4 EV5
(no)
EV6
(nc)
Fan
WARMUP
Standby
(door closed)
OFF OFF OFF OFF OFF OFF OFF OFF
1’ ON
6’ OFF