Mocom millennium B - CHARACTERISTICS OF THE FILLING WATER

Rev.1
Page 1-
9
CHARACTERISTICS OF THE FILLING WATER
DESCRIPTION WATER SUPPLY
VALUES
VALUES IN
CONDENSATE
DRY RESIDUE
< 10 mg/l
< 1 mg/l
SILICON OXIDE SiO
2
< 1 mg/l
< 0,1 mg/l
IRON
< 0,2 mg/l
< 0,1 mg/l
CADMIUM
< 0,005 mg/l
< 0,005 mg/l
LEAD
< 0,05 mg/l
< 0,05 mg/l
HEAVY METAL RESIDUES
(except iron, cadmium and lead)
< 0,1 mg/l
< 0,1 mg/l
CHORIDES
< 2 mg/l
< 0,1 mg/l
PHOSPHATES
< 0,5 mg/l
< 0,1 mg/l
CONDUCTIVITY AT 20°C
< 15 µs/cm < 3
µ s/cm
pH VALUE
5 - 7
5 - 7
APPEARANCE
colorless, transparent,
without sediments
colorless, transparent,
without sediments
HARDNESS
< 0,02 mmol/l
< 0,02 mmol/l
e When purchasing distilled water, always check that the quality and characteristics declared by the producer are compatible with those
shown in the table.
The use of water for generating steam containing contaminants in levels exceeding those shown in the table will significantly
shorten the sterilizer's life.
In addition, this may increase the oxidation of more sensitive materials and increase lime residues on the generator, boiler,
internal supports and instruments.