Rev. 1
Page 2-
9
Door locking
The equipment locks the door.
The door status icon
remains steady on
(door locked).
When START is pushed, and for the entire sterilization cycle
, the lower lines of the display will show the following parameters:
Pressure of the sterilization chamber (bar)
Temperature of the sterilization chamber (°C)
Progressive time of the sterilization cycle (mm:ss)
1 134°C POROUS
WARMUP
101.9 °C
0.01 bar 00:00
The time is counted from the start of the sterilization cycle (first vacuum phase), excluding the preheating phase.
To Next Page
Loading...
