Rev.1
Page 1-
12
420
HANDLING THE PRODUCT
Where possible, the packaged product must be handled using suitable mechanical means (forklift truck, transpallet, etc.) and following the
instructions shown on the package.
In the case of manual handling, the product must be lifted by two persons using the handles cut in the side of the box.
Once removed from the box, the sterilizer must be lifted by two persons and transported on a cart or other similar device.
WE RECOMMEND THAT THE DEVICE BE TRANSPORTED AND STORED AT A TEMPERATURE NO LOWER THAN 5 °C. PROLONGED EXPOSURE TO LOW
TEMPERATURE AN DAMAGE THE PRODUCT
.
e Keep the original packaging and use it whenever the device is to be transported. The use of different packaging could damage the
product during shipment.
B
EFORE TRANSPORT, LEAVE THE DEVICE TURNED-OFF FOR ABOUT 30 MINUTES AFTER THE LAST PROGRAM FINISHES AND DRAIN THE DISTILLED
WATER AND USED WATER TANKS SO THAT THE ALL THE HOT INTERNAL PARTS WILL HAVE TIME TO COOL
.
Dimensions and weight of the unit
– Height (total) 420 mm
– Width (total) 480 mm
– Depth 560 mm
(excluding rear connections)
– Weight (total) 55 kg
To Next Page
Loading...
